On Sat, 22 May 2021 22:14:23 -0400, Ed Pawlowski wrote:

On 5/22/2021 7:56 PM, Deguza wrote:
Hello all,

How many hours would it take to build a simple 10 x 12 shed?


Deguza


Too many. See hubpops post outlining some of the steps.

I'm fully capable of building one but instead bought a pre-fab 10 x 16
built by the Amish, sold by a local distributor. I did have to put some
stone down and level it where it was to be dropped.

The guy drops it in place, ties it down and you are set to go and at a
reasonable price.

There is a reason she did not get call backs. They are not interested.
They cannot compete with the specialists.

Did you get a permit?
In Florida you need the same engineering for a shed as you do for a
house. I am guessing your guys had a mastered plan that was approved
by the AHJ.
My shed is block, covered with pavers with dowelled cells and a poured
tie beam that has the truss straps in the concrete.
I managed to scrounge up most of the materials for free so it was only
my time. I am not a very fast mason ;-)

http://gfretwell.com/electrical/bric...ed%20house.jpg