On 5/21/2021 9:56 AM, Clare Snyder wrote:
On Fri, 21 May 2021 02:46:20 -0700 (PDT), "
wrote:
On Friday, May 21, 2021 at 12:38:14 AM UTC-4, Rod Speed wrote:
wrote in message
...
On Fri, 21 May 2021 11:13:43 +1000, "Rod Speed"
wrote:
wrote in message
...
On Thu, 20 May 2021 04:34:57 -0700 (PDT), trader_4
wrote:
On Thursday, May 20, 2021 at 12:15:08 AM UTC-4, Jannes wrote:
do you need to cut up 2' of siding to install ice and water shield?
--
For full context, visit
https://www.homeownershub.com/mainte...d-3119876-.htm
For what purpose? Around here it's installed on roofs to protect
against
ice damming.
And per code it has to be installed up the roof plane from the lower
edge
until
it's 2 feet past the inside heated space below. Maybe that's where
your
2 feet is
coming from?
Here they want the membrane to cover the entire roof.
This is what I needed on my addition.
http://gfretwell.com/electrical/addition/dry%20in.jpg
It is so, when the hurricane blows the shingles off, you still have a
roof.
Makes a lot more sense to have metal decking instead of stupid shingles.
About $20 thousand more.
BULL****.
Do tell us about your extensive experience in the American roofing industry.
Cindy Hamilton
The only way metal roofs are not significantly more expensive is if
you use "barn roofing" - AKA sheet steel - which is a common roof in
rural Australia
Would you be referring to corrugated galvanized roofing ? We used5 rib
27ga steel , with a 40 year warranty . Cost with me installing was a
little more than having someone else apply shingles - which would have a
shorter warranty period and no protection from hot embers (very rare but
....) coming from the wood stove . Green is a very popular color out here
in the woods ...
--
Snag
Race only matters to racists ...