Purchased a 550 model refrigerator manufactured in 1993 top/bottom
unit second hand. When originally viewed, unit seemed in good working
condition. Refrigerator was cold and freezer was cold. The guy I
bought it from delivered it on it's side(about a 15 mile drive) and
after consulting subzero they said to let it stand upright for
24-48hrs... I left it for 72hrs. Plugged it in and set the settings
on the lowest settings 1. Everything seemed to be working fine. Frig
was about 47 degrees and freezer was 10 degrees. Turned the settings
up to 3 and then 5 on each and on the freezer, I began to notice
condensation forming on the bottom right side about a foot off the
floor. After inspecting further it seems that there is a small
outward dent at the point of condensation. This seems to me that
there is some sort of structural wall damage to the freezer. So, we
turned it back down to 1 and it stops. So, we then loaded the frig
with food and then waited. the frig now won't go below 55 degrees on
any setting. I inspected the condensors and carefully cleaned away
any dust off the coils. I did notice that some of the aluminum fins
are slighly bent. Anybody with any ideas on what could be the
problems with this unit. Thanks.