On 12/03/2021 10:37, George Miles wrote:
38mm or 40mm or 43mm,
do I measure the inside or the outside of the pipe?
Its typically the outside diameter that needs to match.
And 40mm solvent pipe is different size than 40mm pushfit pipe !
Yup, by design, so you don't try a solvent weld pushfit pipe (wrong type
of plastic)
aaaarrrggghhhh
Indeed... I keep a stock of both, and a few "universal" compression
fittings so you can transition from one to the other.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/