View Single Post
  #5   Report Post  
Posted to uk.d-i-y
JohnP JohnP is offline
external usenet poster
 
Posts: 387
Default Siemans Dishwasher (not built in)

Biggles wrote in
:

JohnP Wrote in message:r
JohnP wrote
6: The "flood
warning E15 has come on. It happened once before and I got into the
base to drain the stupid little pot that collects the spillage. I
couldn't see any shource of a leak, Emptied it and it carried on for
about a year. I need to do it again - but I can't recall how I
removed the trim on the bottom of the front. I recall that last time
I removed the front of the door first = but reflected that I hadn't
needed to. Any advice before I do it again. Done it ! Not sure how
- but wiggling an pulling seemed to work.Stupid design of a little
sump with no means of emptying it. Presumably a terminal falure
situation after a costly service call for most people.Emptied it -
but can't see an obviousl leak point.


I had the same problem with Siemens dishwasher. I tightened up the
screws inside, around the top of the drain/filter and that
extended the time between E15 error codes. I think there is a
seal underneath those screws which fails - design
fault.


4 Torx headed screws - thighteded about a quarter turn. I am hopeful.