I know this sounds dumb, but when I had a similar problem, after replacing
the switch box etc., finally fixed it by replacing the power cord. I had
been using a 25 foot extension and the extra current caused the power cord
to fail. Like I said, sounds dumb, but this happened two or three years ago
and the problem persisted for several months. Once I replaced the cord,
been fine ever since.

"Sanford Imhoff" wrote in message
news:UAXOc.60645$8_6.42957@attbi_s04...
Thanks for the reply, Swingman. When you say, "blow everything out" are
you
talking about inside the switch box?

I've been trying to restart it off and on all day to no avail. Would it
take
longer than 6-7 hours to reset? I did reset the circuit breaker several
times.

"Swingman" wrote in message
...

"Sanford Imhoff" wrote in message

I doesn't smell like anything is burnt. Is there some way to check and
rule
out things like a switch, plug, etc. to make sure it isn't the motor?
Thanks
for any advice.

From past experience it may take a good while for that switch to reset.
Might want to blow everything out real good with your air hose.

... and make double sure the circuit breaker in your panel did not trip.


--
www.e-woodshop.net
Last update: 7/10/04