Thread: making wires on circuit board immobile but able to be removed later?
View Single Post
  #9   Report Post  
Posted to sci.electronics.repair
RD[_2_] RD[_2_] is offline
external usenet poster
  
Posts: 3
Default making wires on circuit board immobile but able to be removed later?
In article ,
says...

[snip]

Dab a small bit on an unused corner of the board
and let it dry, to see if it can be peeled off
cleanly.

HTH
Not great advice, as most silicones cure with acetic acid, which corrodes circuit boards.
If you must use silicone, use one that is specifically safe for electronics. There are only a few.

If you're gluing to a bare board and bare
traces that may be true, but it's rare to
find a board that isn't conformal coated
nowadays.
Reply With QuoteReply With Quote