View Single Post
  #28   Report Post  
Posted to uk.d-i-y
John Rumm John Rumm is offline
external usenet poster
 
Posts: 25,191
Default Elec chainsaw question

On 13/11/2020 16:34, charles wrote:
In article ,
John Rumm wrote:
On 13/11/2020 08:59, Harry Bloomfield wrote:


was designed to do. Tree had been blown down, so I only needed to use it
on the ground - I doubt I would have the confidence to use it off the
ground.


Back handles saws can only safely be used two handed, so they are
difficult you use safely off the ground unless say on a scaffold tower,
or properly roped and harnessed to the tree. For aerial work most
arborists will use the smaller "top handle" saws, which can be used
single handed (although even then they are safer with two!).


but the other hand should be holding onto the ladder


Indeed, hence the need for a top handle saw if working from ladders
since its the only way you will have a free hand.

If working from a scaffold tower, or a cherry picker, then you can use a
back handled saw since you have both hands free.

However many pros will be properly roped on with an additional safety
strap round the main trunk, and so can work safely at height and have
both hands free since they are safely supported in their harness.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/