Unisaw stopped running
I had a thermal breaker trip once and I had to press HARD to get it to reset
the first time. Might have had dust in it, but I don't know how it could
have got in there.
Wayne
"Sanford Imhoff" wrote in message
news:VtSOc.59096$8_6.14096@attbi_s04...
Hello all. I have a 10 year old Unisaw with a 1 1/2 horse Delta motor that
I
run on 220v. I was resawing a 16/4 beam (cut part way through then flip
over
and cut the rest of the way through) when the blade pinched and the motor
stopped running. I had already cut several boards off in this manner so I
thought the motor had overheated. I've let the motor set for an hour to
cool
and have pressed the thermal reset but I can't get it to restart. I've
checked for a reset on the motor but don't find one. I've also plugged it
into another 220 outlet that I know to work but nothing there either.
I doesn't smell like anything is burnt. Is there some way to check and
rule
out things like a switch, plug, etc. to make sure it isn't the motor?
Thanks
for any advice.
|