View Single Post
  #11   Report Post  
Posted to sci.electronics.repair
[email protected] ohg...@gmail.com is offline
external usenet poster
 
Posts: 96
Default Small VHF Transmitter

On Tuesday, September 1, 2020 at 1:04:50 PM UTC-4, Fox's Mercantile wrote:
On 9/1/20 11:19 AM, Michael_A_Terrell wrote:
Let me know if that doesn't pan out.

I am sending Peter a Blonder Tongue Agile Modulator.
Model: AM 40-450 Stock No. 59406.
Complete with a manual for setting the output channel
dip switches.



Nice. It would appear that you are not the prick most people in other hemispheres would have us believe.

Many many moons ago when cable TV was still analog, I put an A/B switch on the main line of my cable and used the B side to feed my distribution amp in which the output was connected to a set of rabbit ears and the A side to feed the cable box. That setup broadcast the whole VHF spectrum to any TV in the shop I would put a clip lead to. One day the cable guy comes in - they had been driving around "sniffing" for leakage, and my store was a real hotspot. He thought I had an open ground, but I told him I knew where the bad crimp was and threw the switch to A and the problem went away. The next day I went back to using the B side and a couple of months later they came in again, so they must have sniffed routinely , so I abandoned the plan. I should have tried broadcasting the output of the box alone - maybe they wouldn't have bothered me if it was a narrow spectrum.