Microwave turntable motor failed.
On 30/08/2020 17:15, Andy Burns wrote:
alan_m wrote:
I doubt if there is much difference in the motors between
manufactures. A general search on Ebay shows motors at under £10 and
they all appear to be of the same two physical construction
irrespective of the microwave models they are claimed to fit.
Maybe the gearing changes, mine was 5/5 rpm (which I think means 5rpm on
50Hz and 6Hz on 60Hz)
the o/p seems to want 2.5/3 rpm
so maybe
https://cpc.farnell.com/europart/75-un-13/tyc50a/dp/WG22157
if the D-shaft and pins are right?
It's rated at mains voltage and the connection lugs are important
too.
|