It might load the motor more if its going faster.
Brian

--
--
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"alan_m" wrote in message
...
On 30/08/2020 17:15, Andy Burns wrote:
alan_m wrote:

I doubt if there is much difference in the motors between manufactures.
A general search on Ebay shows motors at under £10 and they all appear
to be of the same two physical construction irrespective of the
microwave models they are claimed to fit.

Maybe the gearing changes, mine was 5/5 rpm (which I think means 5rpm on
50Hz and 6Hz on 60Hz)

the o/p seems to want 2.5/3 rpm

so maybe

https://cpc.farnell.com/europart/75-un-13/tyc50a/dp/WG22157

if the D-shaft and pins are right?


But does it really matter if a turntable revolves (slowly) at twice the
rate?

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk