On 09/05/2020 20:08, alan_m wrote:
On 09/05/2020 19:46, Paul wrote:


The tamper circuit is in series. See bottom of page 5 for example
with two keypads.


The tamper circuit is probably irrelevant to the immediate problem.

3 possibilities
i)Â*Â*Â* it's bypassed at the control box with a link
ii)Â*Â* it's wired in series with the existing (first) remote keypad
iii)Â* it's wired in parallel with the existing remote keypad

If the main control panel is not complaining about a missing keypad then
none of the above are causing the problem.

Ideally it should be wired as ii) but possibly not too important with a
remote keypad because in someone cuts the wires to a remote keypad they
still wouldn't have means to turn off the alarm from those (cut) wires.


With, my Texecom alarm additional keypads are wired in parallel. Each
keypad has to have its own address.



--
Michael Chare