Have you ever spent longer getting the bit you punched out of the cutting
tool than cutting the hole in the first place? Grin.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"alan_m" wrote in message
...
On 29/04/2020 09:54, wrote:
How to get 4 cables into this CU?

Metal CU has clearances of:
top 4"
bottom 4"
right: 0
left: plenty, but the tails run up there.

A christmas-tree cone bit is at least 2" long, leaving little space for a
drill for top or bottom.
Right is possible by drilling through what it's up against, but the
result would look lousy.
Left there's enough space in theory, but a lot of hand held drilling with
a large bit very close to tails? Not loving that idea.
Looked at cutting into the front edge rather than using round entry
glands, but not seeing fireproof grommet strip anywhere.

Suggestions welcome!


Q max punch?

Example
https://www.ebay.co.uk/itm/Q-Max-SHE...MAAOSwPaNdB4Is

or

https://tinyurl.com/y8xv4wtl

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk