On 10/03/2020 11:00, fred wrote:
On Tuesday, March 10, 2020 at 9:25:11 AM UTC, The Natural Philosopher wrote:
On 10/03/2020 08:57, fred wrote:
I wish to remotely control a 3 phase machine. Will this
http://www.emyloworld.com/products/details-34-80.html
do the job.
Impossible to say since it says nothing about what it talks at the far end
--
Truth welcomes investigation because truth knows investigation will lead
to converts. It is deception that uses all the other techniques.
Which al goes to prove I know f/a about electricals
This is where I started
https://mail.google.com/mail/ca/u/0/...nJ?projector=1
Can't see that...
He is an aussie so alarm bells ring
This is the relay he is using
https://www.edwardes.co.uk/products/...-motor-starter
That's a direct online starter - so it combines switching, usually with
no-volt release, and overload protection (although the overload
protection could well have its own enclosure).
Not having seen the documentation for it, its hard to know if it also
supports remote switching. If it does then that might be ideal.
and this the remote
https://www.amazon.de/AC80-260V-1Cha...2B0W7XVA63TRJ8
Its to be used as remote control for this
https://uk.feldershop.com/en/Extract...-3x-400-V.html
IIUC that model is available with the choice of single or three phase motor.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/