blower resistor again...
On 09/03/2020 20:26, Brian Reay wrote:
Even worse, the all kinds of 'cr*p', including leaves, can end up in the
heater. Often, there is space for one in the basic model - they just
don't put the filter(s) in. Worth finding out and inserting. Helps if
someone has Hay Fever as well.
On the one I fixed by replacing the thermal fuse I found the motor shaft
showing some signs of rust so out with the dip stick and one drop of
engine oil was run down the shaft to the bearing.
When I replaced the thermal fuse I cut the wires on the old fuse close
to the body of the fuse. This left enough wire to fold over to make a
mechanical connection to the new fuse leads before soldering.
--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk
|