On Thu, 06 Feb 2020 22:54:45 -0000, Rod Speed wrote:



"Commander Kinsey" wrote in message
newsp.0fk62tkfwdg98l@glass...
On Thu, 06 Feb 2020 21:38:40 -0000, Rod Speed
wrote:



"Commander Kinsey" wrote in message
newsp.0fk4a60zwdg98l@glass...
On Thu, 06 Feb 2020 20:39:07 -0000, Rod Speed
wrote:

Commander Kinsey wrote
Thomas wrote

98mm is under 4 inches. What do you consider short?

The standard length for a 4mm width drill bit tends to be about 60mm.

Useless for almost every task.

Never found one that long useless for what I was doing
and I drilled a hell of a lot when building the house myself.
mostly for bolting the oregon facia boards onto the steel
vertical angle iron that I had welded to the steel roof beams.
Bolted on with gutter bolts.

I'll give you an example, I'm trying to drill through a conservatory
framework (which is 60mm thick) to put a bolt through it to go into the
wall. I need 60mm for the cobalt drill to make the hole, plus some
extra
length as the drill chuck can't get right up against the framework (due
to
the window framing). And even longer when I want to get into the wall
with the masonry bit, having gone through the frame.

That can certainly happen, but to claim that 60mm long
drills are useless for almost every task is completely silly
and just another pathetic excuse for a troll.

Depends what work you do,

Not with your original stupid claim about almost every task.

Do you have OCD? Stop taking things so literally.

If that was true, there were be no market for the 60mm long ones.

They sell because it's the only length you can get!

I always find myself needing to drill a long distance.

Bull**** you do.

It is not bull****. You have no idea what I do.

And longer ones are trivially available anyway.

Not when I searched for them.

That's because you are too stupid to use the appropriate search term.

I typed long cobalt drill bit into Ebay and it came up with very few
options.

That's because you are too stupid to use the appropriate search term.

What's wrong with typing "long cobalt drill bit" when you want a long cobalt drill bit?