View Single Post
  #26   Report Post  
Posted to uk.d-i-y
[email protected] tabbypurr@gmail.com is offline
external usenet poster
 
Posts: 12,364
Default overpaintable anti-mould paint.

On Monday, 25 November 2019 13:47:55 UTC, Mike Halmarack wrote:
On Sat, 23 Nov 2019 01:32:48 -0800 (PST), tabbypurr wrote:


if you have a damp problem you need to get on & tackle it or things often go very much downhill


More a case of over the cliff here.

Having bought anti mould spray from Lidl


usually those are bleach


This one is said to contain N-alky( C12-16)-N,
NDimethyl-N-benzyl-ammonium-chloride
but I'll have to take their word for that.

Sounds impressively chemically. Don't know how effective it is though.
Maybe we'll see after it's been splathered with expensive anti-mould
paint.

and then treated the
offending patches to a double dose, it may be that ordinary emulsion
would be sufficient to cover the treated areas.

The idea of now painting these areas with anti mould paint may be
considered as a belt and braces approach but I wouldn't want to be
spraying unpleasant chemicals around the place too often in future.


Antimould paint is not a solution, but it can help with an otherwise almost adequate approach. 2ndly there is no need ot use nasty chemicals, aspirin, borax etc are fine. Even bleach is enough in the mildest cases.


It had a good dose of bleach to start with but then I read that
bleach only attacks mould on the surface, that it doesn't get down to
the nitty-gritties.


bleach evaporates, it's a 1 off attack only. I wouldn't be confident of anything soaking in & killing it all. Chemicals are useful short term but not the whole solution. Dryness does work.

As some of the affected rooms are decorated with different colours,
I'd prefer not to buy multiple pots of different coloured anti mould
paint, which are available.

Just one colour that was overpaintable with ordinary emulsion would be
preferable.


Not mixing the mould killer into paint is often a better approach.


Maybe N-alky( C12-16)-N, NDimethyl-N-benzyl-ammonium-chloride AND
anti-Mould paint is overkill. The again, underkill might prove
disappointing.


The main thing is to tackle the RH, without that a cure is unlikely. Bleach can then remove much of the surface mould usually, and some chemical can be left behind to attack the rest. Yes you can use mouldproof paint if you want, and can make it from standard emulsion for pence. I've used it, but that last approach is not one to rely on.


NT