View Single Post
  #33   Report Post  
Posted to uk.d-i-y
T i m T i m is offline
external usenet poster
 
Posts: 13,431
Default No timer on HW/CH system?

On Sun, 10 Nov 2019 12:42:42 +0000 (UTC), Brian Reay
wrote:

T i m wrote:
On Sun, 10 Nov 2019 11:50:58 +0000 (UTC), Brian Reay
wrote:

snip

I?d seriously consider a Hive (or similar) system.


I'm not sure that would tick the VFM box Brian, especially for a
rented flat. ;-)



Easy enough to take with you.


Ok.

The system is in three bits. The bit which connects to the internet is
intended to be taken to your next house as I understand the system as it is
linked to YOU. When middle daughter bought a house with Hive, they had to
buy the Internet link box as the previous owner had taken it.


Ok.

The other two bits are the room stat and the boiler interface. All three
link wirelessly.


Ok, that makes things easier (especially in a rented place).


I think the full system was about £150 ( unfitted) for a version compatible
with a fully pumped CH and hot water system. The interface just clips to
the standard controller backplate in most cases, sometimes you need to
change one wire. Then it is just a few buttons to press and setting up a
free account with Hive for remote access.


Might be worth a look I guess.

I assume you can also 'view' the current settings remotely, in case
someone else was home when they might not normally be (in case you
thought you had left the heating on)?

So, two occupants with smartphones, would it know when each was in and
(say) turn the heating off (down) when neither was present?

Cheers, T i m