"Dan O." wrote in message

By set you mean as soon as you change the temperature to above that
the error occurs? Or just after in operation a while?

After the oven temp is set and turned on and in operation for a while
I get the error. The other day when the top oven was on the botom
oven would not go on or if it came on it shut off after a few minutes.


Is there any way to test the thermocouple?

I assume you mean the oven "sensor"? The oven sensor used on your
model should be about 15-16 ohms when at room temperature and around
29-33 ohms at 350°F.

GE Oven JKP47G0K4BG Oven Sensor
http://ng.appliance411.com/data.php?rc=252164

or does this indicate a different problem?

If the error occurs right away without the oven even being on yet, I
would tend to think the problem may be in the electronic control
rather than the sensor. The sensor should function the same no matter
that the control is set to, it just changes resistance as the actual
temperature does.

BTW. The electronic controls on that model are part # WB27X5465 but
appear to be no longer available.

Dan O.
-
Appliance411.com
http://ng.Appliance411.com/?ref411=+GE+oven

=Ð~~~~~~