Bob Eager Wrote in message:
On Mon, 30 Sep 2019 15:39:08 +0100, Jim K... wrote:

Andrew Wrote in message:
On 29/09/2019 10:41, wrote:
On Sunday, 29 September 2019 10:26:10 UTC+1, Mike Halmarack wrote:
Thanks Andy, I see the arrow!
Is the outside edge considered to be the edge closest to those of us
standing outside the wardrobe, rather than those inside?

The outside edge will be the edge closest to the side panel joined on.

As this illustration shows I think you will not be able to pull the
lock down and out until you have pulled the side away.

https://s3files.core77.com/blog/imag...ocknuts-02.jpg

Owain


Isn't this what multi-tools are for ?.

Cut the camlocks and reposition with new ones.

Er no. Read the thread...

I had this situation once. I removed the cam and then used a Dremel to
cut a slot in the underside of the shelf, wide enough for the pin to pass
through. repeat as necessary. Then lift the shelf off.

But did you refit the shelf on repositioned pins too?
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/