Of course this assumes nothing ridiculously heavy is going on the table!
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"TimW" wrote in message
...
On 09/09/2019 14:28, Harold Davis wrote:
I am planning to make a dining table, dimensions 2000mm x 960mm x 40mm,
in
either beech or oak.

The company selling me the timber suggests this would need 9 legs, which
is ridiculous. (I don't think I've ever seen a table with 9 legs before.)
It's a crucial part of the plan that the table have only 4 legs. But I
like
this company's tabletops.

What are my options? Bolt two lengths of steel tube to the underside? Or
would I need a rectangle? Would it be possible to use timber? I realise
it
would have to be bulkier. What would people recommend?

Thanks in advance!

Harry

I would suggest 3 short lengths of timber screwed to the underside. The
screws should be in slots to allow the table top to move and have washers
under their heads to allow you to tighten them. The timber braces should
be as thick as the table top.

9 legs is bonkers. You will find table leg brackets quite good if you
don't want to do any joinery.
https://www.amazon.co.uk/CORNER-brac.../dp/B00MD0WZNU
TW