On 8/26/2019 3:49 PM, David Billington wrote:
On 26/08/2019 23:07, Jim Wilkins wrote:
"Bob La Londe" wrote in message
...
...
Well I found the problem. The logo panel on the stand is on upside
down. LOL, Seriously. I just set the stand down with the logo
upside right, and the stand is upside down. It never even occurred
to me they'd ship it with their logo mounted upside down. I feel
silly.
I was tempted to suggest that if the front holes were too far apart
and the rear ones too close together you should turn it around, but
that would be an undeserved cheap shot.
Turns out it does fit the assembler and inspector.
I've seen a reputedly very intelligent person completely befuddled by
a backwards bandsaw blade. I just wordlessly inverted it. Then to rub
it in I folded the dull one into three loops.
As a lowly lab tech in a sea of Ph.Ds I had to do such things to make
them listen. I never found out which genius kept trying to cut an old
lawnmower blade at the Walker-Turner's wood speed. I couldn't stop
them but I would have offered to take it home and cut it on my chop
saw.
Reminds me of being at evening class at Wichita vo-tech college in
the early 1980s, a few occasions I had to use a hacksaw to cut through
large aluminium sections as it was quicker than doing it with the
horizontal band saw as someone during the day regularly blunted the
teeth on the blade and it would just skate over the top. One time the
instructor heard the maintenance team were going to paint the lathes so
popped in before they had done much and found them starting to paint the
whole lathe, ways and all, he put a stop to that fortunately.
Over on CNC Zone having retrofit and re-retrofit a KMB1 I read some of
the newer KMB1 retrofit threads and sometimes help somebody with some of
the particulars. One fellow not to long back decided to clean up and
paint his. He didn't go so far as to paint the ways or the table, but
he completely painted over the swivel collar on the head, all the bolts
and the ways to extend and retract the head. I have to say it was a
very nice paint job. I don't know how he so closely matched the
original Hurco paint.
Scroll down.
https://www.cnczone.com/forums/hurco...upgrade-3.html
My KMB1 will never look that pretty. LOL.