On Saturday, 24 August 2019 10:43:25 UTC+1, Archibald Tarquin Blenkinsopp Esq wrote:
On Fri, 23 Aug 2019 12:08:58 -0700 (PDT), tabbypurr wrote:
On Friday, 23 August 2019 13:14:47 UTC+1, Lee Nowell wrote:
Hi all,
I have a steel BBQ which I am looking to derust using phosphoric acid. The acid is very runny and the BBQ far too big to dip it into a container of acid. I was wondering what the best method of "soaking" the BBQ in the acid so it would remove the rust. Some thoughts I had were.
1. put kitchen roll soaked in the acid on the surface
2. somehow thicken it (e.g. cornflour or something)
3. continually scrub it with a brush soaked in it
Anyone have any ideas / thoughts?
thanks
Lee.
Save your money next time, use HCl. HCl leaves a surface that rusts very quickly, it must be dried & coated right away when rinsed off.
NT
You must be some kind of masochist.
HCL is evil.
Maybe outside on a windy day with a full chemical suit etc.
AB
You certainly would need to do something that size outdoors
HCl is a joy to work with, results are almost instant. Last job I used it on the rust was gone in about 3 seconds, I wiped it off as I went to avoid excessive fume buildup (indoors).
NT