Thread
:
Machining a groove in wood
View Single Post
#
10
Posted to uk.d-i-y
Andrew[_22_]
external usenet poster
Posts: 6,213
Machining a groove in wood
On 17/08/2019 15:05,
wrote:
On Saturday, 17 August 2019 14:51:51 UTC+1, Tim+ wrote:
I have a 800mm piece of wood that I want to cut a 5mm wide grove in (to a
depth of about 6mm).
I dont have a router but I do have a cheap pillar drill. Is there a bit
that I could use (with a suitable guide for my wood) that would let me
€śroute€ť with my drill?
(The wood in question is one leg of a €śtripod€ť base Ikea lamp. The power
cord dangles down the middle at present and I think it would look a whole
lot better if I could hide the wire along the inside of one leg.)
https://www.ikea.com/gb/en/p/lauters...hite-40405046/
Tim
drills hate side forces on the bearings
Do it with a saw.
NT
Do you have a 5mm wide wood chisel ?. If so cut a slot
manually
Reply With Quote
Andrew[_22_]
View Public Profile
Find all posts by Andrew[_22_]