Cutting steel with angle grinder.
On 04/07/2019 13:53, Michael Chare wrote:
On 04/07/2019 13:36, Brian Reay wrote:
On 04/07/2019 13:02, Michael Chare wrote:
Thank you for the warning. I wanted to modify my old double oven so
that it would fit in my car.
An intriguing idea ;-)
I assume the idea is to use it on LPG. Without wishing to teach you to
suck eggs etc, I assume you know the orifices will need changing.
The old oven had strange orifices.Â* From the back of each of the ovens
there was about a half inch diameter pipe going up to the area of the
cooling fan on the top.
Ah, not those.
The ones which limit the gas to the burners. They are different sizes
for Natural Gas (as used in houses etc), LPG etc. Sometimes you can buy
suitable ones and just unscrew the old ones and swap. Other times you
need to either drill out the holes or plug the old hole and drill a
smaller one (depending on the directing of the conversion LPG-NG)
FROM MEMORY you need smaller holes for LPG but I'm not 100% sure. The
holes are tiny.
Don't forget a CO detector.
|