Carriage Lock Screw Revisited
"Bob Engelhardt" wrote in message
...
On 5/20/2019 5:55 PM, Bob La Londe wrote:
... I am
concerned about shearing off threads on an 1144 bolt, ...
Reality check: how much torque/tension do you expect to put on this
locking bolt? Unless your tightening wrench is going to be a foot
or more long, the torque & tension is going to be small-ish. You
could _probably_ use aluminum and not shear the threads. IMO
On my lathe one finger pushing a 4" wrench is enough.
|