"Ed Huntress" wrote in message
...
Miller has a useful, short article on TIG brazing with silicon bronze
up on their website:
http://tinyurl.com/y6xhcxa4
It's worth knowing about.
--
Ed Huntress
I just tig brazed a cracked swivel base on an old athol vise that was
cracked badly
used alum bronze. Rod flows really well on cast iron
preheated and used a pretty long arc and a sharp tungsten
100 amps max with a pedal
AC with the ac balance maxed out.
Used alum cause Jody at welding tips said it shrinks less.
Did seem to pull quite a bit but short beads and cooled in a bucket of sand
overnite.
Larry Fisk in Idaho
Hi Leon