On 03/03/2019 16:59, Rob Morley wrote:
On Sun, 3 Mar 2019 04:43:59 +0000
John Rumm wrote:

Has anyone seen any decent USB PSUs (2A ideally) with a IEC C14 style
inlet? (or even better a pass through)?

(basically for an application where I have a power feed to a
commercial display TV, that is presented only on normal C13 style
mains lead. No easy way of getting to the supply end, so I need a way
of splitting the power to feed the TV and also an additional USB PSU
to run a Raspberry Pi (the TV has no USB sockets of its own))

Wouldn't it be neatest to fit a C14 socket to the side of a black
project box with a c13 lead and USB lead coming out the other side, and
a bare-board PSU inside?

Yup, that's an option, although a tad less "off the shelf" than I would
like for this particular application.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/