On 03/03/2019 08:11, Tim+ wrote:
John Rumm wrote:
Has anyone seen any decent USB PSUs (2A ideally) with a IEC C14 style
inlet? (or even better a pass through)?
(basically for an application where I have a power feed to a commercial
display TV, that is presented only on normal C13 style mains lead. No
easy way of getting to the supply end, so I need a way of splitting the
power to feed the TV and also an additional USB PSU to run a Raspberry
Pi (the TV has no USB sockets of its own))
How about something like this (a Y splitter adapter)?
https://rover.ebay.com/rover/0/0/0?m... 253539352106
Yup could be part of a solution... I also found this on RS:
https://uk.rs-online.com/web/p/iec-c...pters/2110682/
Cut one plug off, graft on a €śstandard€ť UK 13 amp socket and plug your USB
PSU into that?
Its a bit clunky and lumpy since this will have to be on display of the
rear of the TV. (The TVs are mounted on a ceiling pole in the window of
a shop front). A more "laptop" layout of USB supply might make it a bit
neater.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/