View Single Post
  #1   Report Post  
Posted to alt.home.repair
KMT KMT is offline
external usenet poster
 
Posts: 2
Default Boiler temperature setting question

The 13 year old hydronic heating system in my house seemed to work fine until this winter. It used to warm up the house in 2~3 hours (say from 66 f to 70 f on not so cold days ). But I have noticed the temperature is not coming up fast enough this winter. The thermostat in the room is set at 61 f overnight and starts to call for heat at 7 AM for 68 f. So for the past few days at 7 AM, the thermostat reads 59 f and starts calling for heat. The boiler cycles on and off through out the day and at 12 PM, The thermostat reads around 60 f to 61 f. ONLY 1~2 degrees up for running 5 hours!!!! The system uses Honeywell Aquastat L4103D and L6006A. The dial points at 190 f on L4103D and its set at 140 f on L6006A with Diff 5 degrees. Is this the right setting? According to the gauge on the boiler, it is tuned on at 130 f and off at 190 f. It runs about minutes before shutting off and the next cycle comes on in about minutes. Is this right? Why is the house not warming up like it used to be?