Oren posted for all of us...



On Mon, 14 Jan 2019 15:35:57 -0500, Tekkie®
wrote:


I need to tighten my toilet seat plastic bolts. The nut below the toilet is
manageable but the 'bolt' that extends into the seat hinge is slotted and
any screwdriver I have just mangles the plastic. I tried a putty knife but
it is too wide to get into the inset the bolt head sits in. How do plumbers
do it without damage?

A larger screwdriver?

I do not have any larger ones, that was one of the reasons I stopped before
it got too chewed up.


You could carefully drill the head off, if it is really mangled. Just
enough into the bolt shaft so it comes out with the nut via the
bottom.

I am not at that point yet, thankfully.


Can you get needle nosed vise grips on the head to hold it.

That is an idea, especially if I back up the points on the the needle nose
with some kind of shims...

--
Tekkie