Thread
:
Making an Adaptor from the vintage single wire 5/8" screw on MIC connector to BNC
View Single Post
#
2
Posted to sci.electronics.repair,rec.antiques.radio+phono
Fox's Mercantile
external usenet poster
Posts: 633
Making an Adaptor from the vintage single wire 5/8" screw on MICconnector to BNC
On 1/9/19 8:03 PM,
wrote:
Has anyone seen any female INLINE BNC connectors to buy?
Or, is there another method to accomplish this?
You can use these:
https://www.ebay.com/itm/183118810685
Or you can do what I did.
1. Remove spring from connector.
2. Drill out connector back with 11/32" drill.
3. Tap connector shell using 3/8-32 tap.
4. Solder #16 wire to solder cup on back of BNC female.
5. Stick wire through connect grommet in Amphenol connector.
6. Screw BNC into connector shell. Tighten.
7. Solder wire to Amphenol connector grommet.
8. Cut wire, smooth with file.
Presto! Instant, sort of, Amphenol Microphone to BNC adapter.
--
"I am a river to my people."
Jeff-1.0
WA6FWi
http:foxsmercantile.com
Reply With Quote
Fox's Mercantile
View Public Profile
Find all posts by Fox's Mercantile