DIYbanter - View Single Post

\[email protected]

On 1/2/19 8:51 PM, wrote:
On Wed, 02 Jan 2019 16:25:25 -0500, Clare Snyder
wrote:

On Wed, 2 Jan 2019 15:21:27 -0500, Tekkie® wrote:

I was reading an advertisement by Leviton that stated their AFCI/GFCI
circuit breakers were the only ones that met the new standard for indicating
end of life.

I also stumbled across an episode of This Old House where the electrician
was installing a Leviton load center.

Any thoughts or opinions? I suppose that will increase the cost up^.
Sure looks like a winner if it lives up to it's promise. It is
designed tomake wiring AFC and GFC circuits dead sinple, and very neet
- with NO pigtails and no "common " neutral busses. Every circuit is
easy to follow and connect - no chance of "floating" neutrals.

Won't likely be much more expensive than a Square D QO panel and
devices, which are the "gold standard" up until now.

If I had not just installed the QO 2 years ago I'd defnitely be
looking at the Leviton offering pretty closely - - -

I have never seen a Leviton panel, how do the GFCIs connect to the
neutral bus?

No wires connect directly to the new breakers. The breaker just plugs in
to the backplane busses of the Load Center. Branch wiring is done to
lugs in the Load Center, not on the breaker

Makes replacing a breaker a simple pull-out/plug-in operation.

https://www.leviton.com/standalone/L...ter/index.html