I put the saw blade in my bench vise and then loosen the bolt and bevel. I
find an adjustable wrench is easier than the spanner that comes with the
saw. (Longer handle=more torque.)
..


"Childfree Scott" wrote in message
om...
You neeed two wrenches to remove the blade. One is to remove the
outer nut. and the other to hold the axle in place. I used a thin
32mm bike wrench on the inside of the blade and a 1" wrench on the
outside to remove the nut. At least that's how it worked on my
vintage 1980 Rockwell (AKA Delta) tablesaw.