Well - my Indesit was noisy for a few cycles after having new brushes
fitted - and why not????
--
Regards
John
"PJO" wrote in message
...
Yes, the brushes need to bed in.
Wash should be so quiet that you have to look to know it is running.
Spin,
(ours is 1400rpm bosch ) makes a little noise, but hey, its so little
compared to anything else.
I've never heard anything so bloody daft as "the brushes need to bed
in"!!!
Oh Please!!
In fact, are there any brushes??!! Most new appliances use induction
motors.
Even so, the bedding in of brushes in a fallacy.
It's probably a bearing and if anything like our NEW Hotpoint will need a
replacement within weeks.
New brushes don't make noise - poor quality or badly lubricated bearings
do!
Manufacturers these days use the cheapest possible bearings and don't use
much (if any) grease.
Brushes bedding in my arse!
---
All of my outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (
http://www.grisoft.com).
Version: 6.0.556 / Virus Database: 348 - Release Date: 26/12/2003