On 11/11/2018 07:06, The Natural Philosopher wrote:
On 10/11/2018 23:35, Robin wrote:
On 10/11/2018 17:45, John Rumm wrote:
On 10/11/2018 17:17, The Natural Philosopher wrote:
On 10/11/2018 16:27, Robin wrote:
On 10/11/2018 16:22, John Rumm wrote:
On 10/11/2018 07:17, The Natural Philosopher wrote:
It was the sandblasting that put the plaster in such a bad state
last time
Another sanding option that occurred to me, a sanding drum in an
angle drill, to create something akin to a powered abrasive roller.
It may be because I'd assumed TNP was using a lightweight filler
but I'm hearing a distant cockney voice saying something about only
blowing the doors off
polyfilla is currently in use.
I find the filler designed for filling taper edge boards is *much*
easier to sand nicely (and quickly) than polyfiller.
Yes, with that much ceiling and such wide holes I'd assumed something
easier to sand - and also cheaper.Â*Â* My last buy was 5kg Gyproc
Easi-Fill 20 for about £13.
Tried that. Harder to sand than polyfilla, and a similar price
The last one I used was IIRC:
https://www.wickes.co.uk/Knauf-Joint...-10kg/p/224541
That sanded very easily and quickly.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/