On 09/11/2018 10:52, John Rumm wrote:
Any hand sanding would need to be very quick and minimal obviously given
the scale of the job. Those proper sanding pads with handels etc make it
much easier.
I have that. Actually a permagrit block is damned good
One of the best acquisitions I ever made
https://www.permagrit.com/sanding-blocks/
Also the ones that can be mounted on a pole make it much
easier - i.e. you can stand ont he ground and use full arm moevments etc.
Just as tiring and less control judging by my pole mounted paint roller :-(
Working overhead even with a lightish tool like a multimaster will still
get tiring.
Tell me about it.
The only other option I can think of for sanding right to an edge that
can also achieve a good finish, is a linear action sander. These aree
far less common than orbital or RoS machines. Festool do one:
https://www.festool.co.uk/products/s...q-plus-gb-240v
£459?
****!
--
Any fool can believe in principles - and most of them do!