View Single Post
  #12   Report Post  
Posted to alt.home.repair
trader_4 trader_4 is offline
external usenet poster
 
Posts: 15,279
Default UV and LEDs, was: Flourescent lights

On Thursday, October 25, 2018 at 8:43:45 PM UTC-4, TimR wrote:
The ballast in my basement kitchen fixture went bad.

I replaced it with an LED tube. I wired it direct. You can buy either kind - the tube you use with a ballast, or the tube you wire directly.

The advantage of the ballast type is that you can always swap in a regular tube if you don't like the LED. But I didn't have that option. The disadvantage is you might have to change out the coffins (the sockets that hold the tube.) That may or may not be an issue.


That is an issue. They are commonly called tombstones, because that's
what they look like, not coffins.




Mine has run fine for a couple of years. It starts slower than the regular fluorescent did,



Is that a typical characteristic of these? That's surprising, because
the typical LED bulbs you buy for other applications today are instant on.



but seems immune to the cold. I don't heat the basement and in the winter the lights would warm up a bit slow. The LED takes a moment to come on but then it's full brightnest.

It uses less electricity. And, it is less bright. But not enough to be a problem. Replacement is going to be a problem, the big box stores no longer carry that type around here.