View Single Post
  #12   Report Post  
Posted to uk.d-i-y
John Rumm John Rumm is offline
external usenet poster
 
Posts: 25,191
Default furred hot water pipe

On 01/08/2018 20:40, The Natural Philosopher wrote:
On 01/08/18 20:27, wrote:
On Wed, 01 Aug 2018 19:55:48 +0200, Thomas Prufer
wrote:

On Wed, 01 Aug 2018 17:27:40 +0100,
wrote:

Thanks, to clarify I intend to first empty theĀ* galvanised steel cold
water tankĀ* and wet vacuum any scale in the bottom. I was only going
to part fill it and would add the fernox DS3 as you advise.

Fernox DS3 is OK on glavanised, I take it?


It says it's safe to use but I don't know until an expert comes along.

My guess is the acid's affinity for the carbonate is higher than that
for metal. it's moot about the zinc as that seems to have gone from
the inside of the tank.

I hope if I use the right dose it will deal with the lime scale and
leave the metals alone.

AJH

Most decsalers are weak enough acids to leave metals alone. HCl is not
one of them. DAMHIKT


DS3 is not HCL, but sulfamic acid (H3NSO3), generally safe on metals,
although may dull chrome on prolonged exposure.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/