In article ,
Brian Reay wrote:
On 31/07/2018 07:16, Rod Speed wrote:
"Brian Reay" wrote in message
news
On 29/07/2018 23:59, Rod Speed wrote:
wrote in message
...
On Sunday, 29 July 2018 22:22:18 UTC+1, ganga wrote:
"JoeJoe" wrote in message
o.uk...
Garden shed padlock is refusing to badge.
It is (or at least looks like) one of these:
https://www.masterlock.eu/home-personal/product/170EURD
Had it for 10+ years, giving it a quirt of WD40 every couple of
years.
In the last couple of months it was a bit tricky to open - had to
pull/push key in/out slightly until it would turn.
Today it would not turn at all - key goes in, and nothing more. I
tried
the other two keys we have, but still nothing.
Not too bothered about replacing it, but Before I get hold of the
neighbour's bolt cutters, is there anything else I can try?
You should have used powdered graphite, not WD40.
Works a treat on the padlock I lock the trailer up with.
for an outdoor lock oil is better,
Nope, that is an outdoor lock.
it stops the innards rusting up.
They don‘t rust with a decent padlock and oil collects dirt.
Try some 'Plus Gas' - a releasing oil, in the key hole
That‘s not a good idea, it then attracts dirt which make the lock worse.
Powdered graphite works much better in the lock.
For a regular lube, I agree. To help with a seized lock, graphite is
useless- it can't get were it needs to.
With a totaly siezed lock, possibly. But for a stiff lock, graphite is not
only the immediate answer, but the effects last a long time.
--
--
from KT24 in Surrey, England
"I'd rather die of exhaustion than die of boredom" Thomas Carlyle