Hmm, well this seems at least by feel to have no screws. Its got one of
those semi detached head things ands there is a hole in the back, but there
seems to be no screw in it. On the charger hole end you can feel the join. I
guess it needs a pair of eyes to look at it.
There is apparently an lcd display on it that shows battery with a
different amount shaded according to the amount left in the charge, but
somebody looked and said it was always blank which is not a good sign!
In the old days these things used to just have a string of cells in series
and a little plug on the internal pcb that fitted in two slots.

The bit I need to protect is the trimmer, as its the best one I've ever had.
it can cut hair, not just the sides.
The weak link as always is the batteries in these things. You would think
by now some bright designer might have looked at the power tool market and
used a battery pack system for all models. My guess though is that they
consider 70 quid to be a disposable item even though its only five years
old.
I'm beginning to warm to these people who are trying to get the right to
repair established. Its relatively recent that security screws, and welded
shut devices have become the norm.


Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Harry Bloomfield" wrote in message
news
John Rumm wrote :
Not done it on a remington, but I have changed the batts on a Braun. In
that case there were a couple of screws under rubber plugs in the base of
the case, which once removed allowed the shell to slide off. A pair of
radial leaded NiCds in that model which could then be de-soldered from
the PCB and replaced.

Similar on a Phillips.