On 6/3/18 12:08 AM, J. Clarke wrote:
On Sat, 02 Jun 2018 21:41:25 -0700, OFWW
wrote:

On Sat, 2 Jun 2018 22:23:54 -0500, -MIKE-
wrote:

On 6/2/18 9:41 PM, J. Clarke wrote:
On Sun, 03 Jun 2018 02:10:39 GMT, Puckdropper
wrote:

-MIKE- wrote in news
On 6/2/18 10:11 AM, Puckdropper wrote:

My most recent wiring project was running outdoor rated CAT6 out to
the garage. You're already digging for one set of cable, might it be
worth digging for another? (Cat6 is easy to terminate, just use a
punch down connector and a decent punch tool.)

You can't run network cable close to power cable, though, unless you
take certain precautions. Parallel runs are a bad thing, but if you
must go close to power cables you can enclose the cable in a grounded
pipe. I didn't run in to these problems with my cable run, so I
didn't research them further.

Puckdropper


My buddy is an IT guru and he told me to run CAT10 with the AC and I'd
be fine.



I wasn't aware CAT10 was a thing yet. AFAICT, they're only up to CAT7.

A quick search (I'm not an expert, not even claiming to be) doesn't show
any results for CAT10. Wonder if he meant something different?

FWIW, I'd put the LAN cables in a different conduit as well. You know
that LAN standards will evolve for a while longer and you might decide 20
years down the road it's worth upgrading to faster cable. It'd be easier
to pull the cables out if all that's there is LAN and you don't have
another cable you need to stay put.

While I agree that it's good to have the cables separated, I would be
very surprised if anything above 10GB/sec was common for home use in
20 years. The trend is to wifi, not faster wired networks.


My guy says the trend will be back to wired, because wireless is getting
too clogged up.
Wired is still faster and more reliable and will be for the foreseeable
future or until they find new frequencies. :-)

He is right. Especially when you find out how easy it is to hack WIFI
to the homes and businesses around you, especially on those that
haven't a clue about security. Years ago I used to connect up and
print out messages on their printers to clue them in.

Wired is faster, but how fast do you NEED? I see no evidence of a
trend to wired for residential use.


All I know is when I ran Ethernet out to a range extender in my garage,
I no longer got any dropouts or buffering. I went from getting low
double-digit Mbps to 400+.

I also went wired on one of our TVs, which is right next to the router
and it improved its performance greatly. Of course, this could be a
limitation in the TVs wifi intake performance.

Wired devices aren't competing for channels either, right?


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com