On 26/04/2018 11:22, alan_m wrote:
On 24/04/2018 12:47, John Rumm wrote:
You can't use the pilot drill when using a hole saw to remove just the
corner of the wood - there will be nothing for the pilot to drill into
that will offer any support / guidance.
Just clamp a piece of sacrificial wood of the same depth to the side of
the work piece and drill the pilot hole and/or the complete large hole.
Not much point when the work is held in a jig, and the saw in a pillar
drill - just remove the pilot altogether.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/