On 25/04/2018 16:02, wrote:
Yeah the Amazon description isn't that helpful. It says "Over-current
protection and short circuit protection"but TBH not sure what to look
for to determine whether it needs to be seperately fused.


The protection is probably on its load side... There is unlikely much
you can do on the supply side that will require overload protection, and
chances are it will be fault protected by the 13A fuse upstream.

Having said that, if you need a convenient way to make a termination to
it and join wires (i.e. if you can't easily run T&E into it) then a FCU
us as good a box and place to do it as any other enclosure).


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/