The bottom line is that it is either overflowing or its got a leakycyphon
somewhere.
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
"John Rumm" wrote in message
o.uk...
On 31/01/2018 20:44, Mooncheese wrote:
Hi guys n gals.
I own a Geberit AquaClean 8000plus Care toilet (with cistern - non wall
hung)
its been fantastic!! - Until recently.. It has developed a constant
drip/run
in to the toilet pan.
I have looked on YouTube etc and seen people clean the silicone rubber O
ring
by removing the flush mechanism etc and cleaning it... also they checked
that
the overflow wasnt leaking etc... mine seems pretty dry and i even
wrapped it
in PTFE tape just to make sure and pressed it back in the hole.(I am
almost
100% it isn't seeping through there)
NOW I took the cistern cover off to find a space age looking inners and
room
nowhere near enough to get my hands etc in there to do anything!! What
little
room i could see I couldn't figure out how the flush would remove so :

1 - Does anyone know how to remove the flush mech in these toilets?
2 - How do you go about it?

You can download the installation manual he

https://www.geberit-aquaclean.co.uk/...plus_care.html


Ultimately once you get past the cosmetic panels and covers etc, it looks
not dissimilar from a traditional flush pipe connected (i.e. not a close
coupled) design. A couple of retaining bolts to hold the cistern to the
pan, and what looks like a universal/compression fitting to connect the
flush pipe. (plus lots of other fixings to hold it to the frame)


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/