DIYbanter - View Single Post

-MIKE-

On 12/19/17 11:03 AM, wrote:
On Monday, December 18, 2017 at 5:51:57 PM UTC-6, -MIKE- wrote:

I *am* thinking about the contractor version of the track saw.
There have been quite a few time in this past year when I really
could've used one.

Working during the day, there is no way I could respond fast enough
to any post to make a two minute window or received/responded. I
can't do that when people tell me my check is ready!

Out of all the Festool equipment I have looked at and handled, the
track saw is the only piece I nearly bought on. I went to see Karl
and Leon one year and Karl ripped a piece of plywood for me so he
could show me the quality of cut. I was actually astonished. He and
Leon had just finished a kitchen build out and apparently used the
track saw to break down the sheet goods before final sizing at the
table saw.

You could easily use the end results from the track saw to build
cabinets. The whisper thin veneer didn't chip, their was NO sign of
saw marks anywhere, and the open grain from the cut was very smooth.
Ready for glue up!

MIKE, if you get one, make sure you get with Leon about the
modification he and Karl have to done to their setup just to make the
saw/track use easier and a bit better.

Robert

I will. I remember making a metal note about that when they posted it.

--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com