On 17/12/2017 23:06, GB wrote:
A fluorescent tube is about 3000 - 4000 lumens per meter.
The typical under cupboard T5 tubes are significantly less than that.
more like 1500 lumen/m tops.
The tapes are often 1000 lumen/m - however you can have a continuous run
without needing to stop for the ends of the tubes / fittings.
Can I just stick the bare tape to the underside of the cabinets or
does it need to be
mounted into a holder such as RS Stock No. 797-2432, a horrendously
expensive product!
It can just be stuck on. It doesn't get hot. However, the strip may get
dirty, particularly in a kitchen, and it would be virtually impossible
to clean. Those housings can just be wiped with a soapy cloth.
If you get the waterproof version, its dipped in a clear silicone jacket
that is smooth and can be wiped down.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/