"Cydrome Leader" wrote in message
news
Just had quite the battle with a clogged up spray paint can.
Something
(paint solids?) was clogging the tube that goes up tube in the can.
I
though it was the nozzle at first, so I tried another one.

Short story is brake cleaner will REALLY clean those nozzles out
fast. A
little spray and a few minutes will make dried enamel just flakes
off
those nozzles too.

It works way better than a soak of mineral spirits, which mostly
does
nothing to dried paint anyways. Since many cans now spray upside
down, the
old trick of clean out the nozzle with just some propellant doesn't
work
anymore anyways.


I'm working on car rustouts with several sprays and have been removing
the nozzles and dripping solvent through them with an eyedropper or
lighter fluid can.

3M Cavity Wax and Bondo Glass look good so far (1 week) in the salt
water test, rust converter not so much, and the epoxy I used last time
as filler had broken loose. Recently purchased LPS-3 isn't as
effective as what I bought in the 90's.

-jsw