Be warned: it is also possible that at some point during the
uninstallation you will be instructed to reboot the Microhood then allow
the Microhood Uninstaller to continue its work; BUT when you reboot the
Microhood, the Microhood Uninstaller will refuse to run, leaving you
with a Microhood that will neither run nor uninstall completely.

In that case, the only thing to do is reformat your Microhood, then
install Microhood XPletive deleted (a Full version, not an Upgrade,
because now there will be no trace of the previous version left) and
hope that it works better.

-=-
Alan


On 10/27/03 01:23 pm Stormin Mormon put fingers to keyboard and launched
the following message into cyberspace:

Hmm. Most microhood problems with install can be remedied by:

Check your software. Is your wall compatile with your new microhood?

Check also for updates while you're at it.

Close all other appliances in the room. If your refrigerator is still
running, your microhood might not install.

Use the proper utility. Using your own power screwdriver might not
completely uninstall all microhood components. Use the Microhood Uninstaller
which is provided with the microhood.

Reload your house. Use the "electrical power menu" to shut down all
appliances in your home and restart them. Don't just pull the electrical
meter, or your house will have to run Scanroom because House wasn't shut
down properly.

Be sure you have a registered and legal copy of Microhood, not just a
bootleg copy on a rewritable appliance from a buddy.